TECHNICAL SPECIFICATIONS
Chemical base: Methoxy Cyanoacrylate
Colour: Crystal clear
Consistency: Gel (thixotropic)
Density approx.: 1,07 g/cm³
Filling capacity: Limited
Final bond strength (Alu): 22 N/mm²
Final bond strength after: 24 hours
Flexible: Yes
Initial Bonding after: 20-60 seconds. This might
vary, based on Gcircumstances,
like Gmaterials, temperature and humidity.
Minimum temperature resistance: -50 °C
Maximum temperature resistance: 100 °C
Moisture resistance: Good
Solvent free: Yes
Viscosity: Medium viscosity
Water resistance: Very good 

ALL PURPOSE ADHESIVE SUPER

Bonds super strong and super fast - but remains adjustable for approx. 20 seconds and does not stick fingers together immediately. The patented formula is suitable for virtually all flexible, solid, porous and non-porous materials. Withstands vibrations and shocks, is flexible, transparent and odourless. Humidity and temperature resistant from -50 °C to +100 °C.

• super strong
• super fast
• adjustable - no immediate finger bonding
• patented formula 

SUITABLE FOR:
Universal - glues porcelain, ceramic, many plastic materials, metal, wood, glass, leather, rubber, Styrofoam®, paper, cardboard, and much more. 

NOT SUITABLE FOR:
Not suitable for leather clothing, textiles, Polythylene (PE) and Polypropylene (PP). 

SURFACE REQUIREMENTS
Materials to be glued must be clean, dry and free of dust and grease.

PRELIMINARY SURFACE TREATMENT
Any dust, oil, grease, wax or separating agent should be thoroughly removed from the surfaces to be stuck together. The best way to achieve this is to rub the parts a number of times with appropriate solvents, such as acetone (if suitable for the material – check first!). For metals and metal alloys it is usually sufficient to roughen the surface using emery paper or by grinding or brushing.

DURING USE
DIRECTIONS FOR USE
Surfaces to be glued together must be of exactly the same shape and size, dry and free of dust and grease. Apply a thin layer of adhesive to one side. Press parts together. Glue joint remains adjustable for approx. 20 seconds. After use, wipe the applicator tip dry and close firmly.

ADVICE
The thinner the glue layer, the faster and stronger the final bond.

POINTS OF ATTENTION
Contains cyanoacrylate. Bonds skin and eyelids together in seconds. If product comes into contact with the eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin, glue can be dissolved by soaking in warm soapy water. Then apply a skin cream. Keep out of the reach of children.

AFTER USE
STAINS/RESIDUE
Remove wet glue stains immediately with acetone. Hardened glue can only be removed mechanically.

STORAGE CONDITIONS
Store in a dry, cool and frost-free place.